Full Schedule

8:00 AM – 9:30 AM EDT

Additive Manufacturing Uses in Die Casting

Location: Room 120

Moderator: – General Motors

8:00 AM – 8:30 AM EDT

Case Study of A Serviced AM 3D Printed Maraging Insert in HPDC

Location: Room 120

Presenter: – Ryobi die casting (USA) Incorporated

Additive Manufacturing Uses in Die Casting

8:30 AM – 9:00 AM EDT

Printing Hot - Carbon steels from the metal 3D printer – A great solution for die casting!

Location: Room 120

Presenter: – TRUMPF Laser- und Systemtechnik AG

Additive Manufacturing Uses in Die Casting

9:00 AM – 9:30 AM EDT

An Empirical Study of Friction Factors in Laser Powder Bed Produced Tubes

Location: Room 120

Presenter:

Additive Manufacturing Uses in Die Casting

8:00 AM – 9:30 AM EDT

Improving Aluminum Die Casting Alloys

Location: Room 124

Moderator:

8:00 AM – 8:30 AM EDT

Roadmap for Automotive Aluminum

Location: Room 124

Presenter: – Hydro Aluminum North America

Improving Aluminum Die Casting Alloys

8:30 AM – 9:00 AM EDT

Controlling of primary alpha-Al for super ductile and high strength diecasting Al-Mg alloys

Location: Room 124

Presenter: – CSMET New Materials Group

Improving Aluminum Die Casting Alloys

9:00 AM – 9:30 AM EDT

Influence of Subsurface Microstructure Variants on Bending Ductility of Aural™-2 HPVDC Thin-Walled Components

Location: Room 124

Presenter: – Université du Québec à Chicoutimi (UQAC)

Improving Aluminum Die Casting Alloys

9:45 AM – 11:15 AM EDT

Die Casting Sustainability

Location: Room 124

Moderator:

9:45 AM – 10:15 AM EDT

Structural Die Casting Alloys with High Recycling Content and Low Carbon Footprint

Location: Room 124

Presenter:

Die Casting Sustainability

10:15 AM – 10:45 AM EDT

Achieving 100% Recycled Aluminum in Die Casting Applications

Location: Room 124

Presenter: – The Ohio State University

Die Casting Sustainability

10:45 AM – 11:15 AM EDT

Sustainable Materials in Automotive Body Engineering – The Role of (Giga-) Casting Technology to meet Net Zero Targets

Location: Room 124

Presenter: – Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM

Die Casting Sustainability

9:45 AM – 11:15 AM EDT

Failure and Quality Analysis of Additively Manufactured Tooling

Moderator:

9:45 AM – 10:15 AM EDT

Modeling Pore Formation in Additively Manufactured High Pressure Die Casting Dies

Location: Room 120

Presenter: – Purdue University

Failure and Quality Analysis of Additively Manufactured Tooling

10:15 AM – 10:45 AM EDT

The 3D Conformal Cooling Line Crack Mechanism

Location: Room 120

Presenter: – Ryobi Die Casting, USA

Failure and Quality Analysis of Additively Manufactured Tooling

10:45 AM – 11:15 AM EDT

Metallurgical Analysis of Failed 3D-Printed Inserts for HPDC Dies

Location: Room 120

Presenter: – Ryobi Die Casting (USA)

Failure and Quality Analysis of Additively Manufactured Tooling

10:00 AM – 5:00 PM EDT

NADCA CastView Demonstration

CastView

10:00 AM – 5:00 PM EDT

NADCA Virtual Reality Project

Location: Booth 324

Virtual Reality

10:20 AM – 10:50 AM EDT

Best Practices for Bag Leak Detection Systems in Clean Air Act Permitting

Location: Booth 442

Innovation Theater

Sponsored By

11:00 AM – 11:30 AM EDT

Maximizing Efficiency in Foundries: Sustainable and Cost-Saving Strategies using Digital Solutions

Location: Booth 442

Innovation Theater

Sponsored By

11:30 AM – 3:30 PM EDT

Young Professionals Organization Fall Meeting

Location: Room 125

11:40 AM – 12:10 PM EDT

Die Casting Excellence to Maximize Productivity

Location: Booth 442

Innovation Theater

Sponsored By

12:20 PM – 12:50 PM EDT

Turn-key Solutions for Ultra-large Structural Castings

Location: Booth 442

Innovation Theater

Sponsored By

1:00 PM – 2:30 PM EDT

Advanced Tooling Materials and Processes

Location: Room 120

Moderator: – Colorado School of Mines

1:00 PM – 1:30 PM EDT

High Thermal Conductivity Steel – Thermodur® 2383 Supercool – in the HPDC Injection System

Location: Room 120

Presenter: – B.A. Bonomi Acciai srl

Advanced Tooling Materials and Processes

1:30 PM – 2:00 PM EDT

Heat Check Resistance Hot Work Tool Steel – Thermodur E 40 K Superclean

Location: Room 120

Presenter: – Swiss Steel Group

Advanced Tooling Materials and Processes

2:00 PM – 2:30 PM EDT

High Toughness Steel Grades for Huge Molds of Die-Casting

Location: Room 120

Presenter: – Daido Steel Co., Ltd.

Advanced Tooling Materials and Processes

1:40 PM – 2:10 PM EDT

Innovative, Tailored Solutions for Lighter, Leaner Operations: Saving Energy and Costs with Smart Equipment Upgrades

Location: Booth 442

Innovation Theater

Sponsored By

3:30 PM – 5:00 PM EDT

Welcome Party

Location: Show Floor

Special Event

Sponsored By

8:00 AM – 9:00 AM EDT

Update on US Government Affairs

Location: Room 124

Presenter:

Special Session

8:00 AM – 9:30 AM EDT

Process Control through Simulation

Moderator:

8:00 AM – 8:30 AM EDT

Simulation of Die Filling for Steel in High-Pressure Die Casting Process

Location: Room 120

Presenter:

Process Control through Simulation

8:30 AM – 9:00 AM EDT

The Formation and Transportation of Externally Solidified Crystals in Aluminum Die Casting Process

Location: Room 120

Presenter: – The Ohio State University

Process Control through Simulation

9:00 AM – 9:30 AM EDT

Accelerating the Scalability of PrintCast structures using High Pressure Die Casting

Location: Room 120

Presenter: – Oak Ridge National Laboratory

Process Control through Simulation

9:30 AM – 11:30 AM EDT

Government Affairs Committee

Location: Room 125

Committee Meetings

9:45 AM – 9:00 AM EDT

Innovative Die Casting Materials

Location: Room 120

Moderator: – The Ohio State University

9:45 AM – 10:15 AM EDT

Characterization of the Microstructures and Properties of Steel Die Castings Produced During Plant Trials

Location: Room 120

Presenter: – Colorado School of Mines

Innovative Die Casting Materials

10:15 AM – 10:45 AM EDT

Solder Resistant Alloys Through Tresca Friction Criteria Optimization

Location: Room 120

Presenter: – Mercury Marine

Innovative Die Casting Materials

10:45 AM – 11:15 AM EDT

The Effect of Secondary Material on the Properties of Aluminum HP-DC Alloys for Structural Components

Location: Room 120

Presenter: – Aluminium Rheinfelden Alloys

Innovative Die Casting Materials

9:45 AM – 11:15 AM EDT

North American On-Shoring and Near-Shoring

Location: Room 124

Presenter:

Special Session

10:00 AM – 5:00 PM EDT

NADCA CastView Demonstration

CastView

10:00 AM – 5:00 PM EDT

NADCA Virtual Reality Project

Location: Booth 324

Virtual Reality

10:20 AM – 10:50 AM EDT

Automation Systems & Design Inc Presentation

Location: Booth 442

Innovation Theater

11:00 AM – 11:30 AM EDT

Non-Newtonian Description for a High-Pressure Die-Casting (HPDC) Process Applied in A356 Aluminum Semisolid Alloy

Location: Booth 442

Innovation Theater

12:15 PM – 2:00 PM EDT

Die Casting Industry Awards Luncheon

Location: Wabash Ballroom

Special Event

2:00 PM – 3:30 PM EDT

Die Casting with Artificial Intelligence

Moderator:

2:00 PM – 2:30 PM EDT

Study on the Use of Sensor-Derived Parameters on the Injection and on other Components of an HPDC Machine for the Purpose of Predictive Maintenance

Location: Room 120

Presenter: – Milan State University

Die Casting with Artificial Intelligence

2:30 PM – 3:00 PM EDT

Industry 4.0: Accelerating Your Foundry's Performance through Digitization

Location: Room 120

Presenter: – Sinto America, Inc.

Die Casting with Artificial Intelligence

3:00 PM – 3:30 PM EDT

Optimal Data Strategies and Augmentation Techniques for Enhanced Anomaly Detection in Industrial Applications

Location: Room 120

Presenter: – Purdue University

Die Casting with Artificial Intelligence

2:00 PM – 3:30 PM EDT

Finance Committee

Location: Room 125

Committee Meetings

2:00 PM – 3:30 PM EDT

Protecting the Die from Molten Aluminum

Moderator:

2:00 PM – 2:30 PM EDT

The Evaluation of Deformations in High Pressure Die Casting Molds: a Comparative Study using FEM and FEEA Method

Location: Room 120

Presenter: – University of Caxias do Sul

Protecting the Die from Molten Aluminum

2:30 PM – 3:00 PM EDT

Preparation of a High-performance Coating using Cathodic Vacuum Arc Deposition for Die-casting Molds and its Characterization

Location: Room 120

Presenter: – Kawata PE Office

Protecting the Die from Molten Aluminum

3:00 PM – 3:30 PM EDT

Resistance of several Tungsten Heavy Alloys in Aluminum Die Casting Application

Location: Room 120

Presenter: – Plansee USA LLC

Protecting the Die from Molten Aluminum

2:30 PM – 3:00 PM EDT

How Simulation Analysis Can Support the Expansion From Commodity Casting to Giga Casting

Location: Booth 442

Innovation Theater

Sponsored By

3:10 PM – 3:40 PM EDT

Cost Effective Production of HPDC Structural Parts

Location: Booth 442

Innovation Theater

Sponsored By

3:45 PM – 5:15 PM EDT

Metal Melting, Treatment, and Transportation

Moderator:

3:45 PM – 4:15 PM EDT

“Isomelting” Technology by Lethiguel: Melting and Holding Aluminum using Conductive Electrical Immersion Heaters

Location: Room 120

Presenter: – Jean Moulin Lyon 3 University, EM Lyon Business School

Metal Melting, Treatment, and Transportation

4:15 PM – 4:45 PM EDT

Beyond Boundaries – Unveiling Breakthroughs in Vacuum Dosing Technology for Mega & Giga Foundries

Location: Room 120

Presenter: – MELTEC Industrieofenbau GmbH

Metal Melting, Treatment, and Transportation

3:50 PM – 4:20 PM EDT

Intelligent Cost Saving in Die-Casting-Die Procurement

Location: Booth 442

Innovation Theater

8:00 AM – 9:30 AM EDT

Post Die Casting Technologies and Techniques

Moderator: – Ryobi Die Casting, USA

8:00 AM – 8:30 AM EDT

Plasma Arc Cutting to Enable High Volume, Large HPDC Parts Manufacturing

Location: Room 120

Presenter:

Post Die Casting Technologies and Techniques

8:30 AM – 9:00 AM EDT

Enabling Aluminum-Aluminum Compound Casting in HPDC: Material Joints for Structural Applications via Cold Spray Coating

Location: Room 120

Presenter: – Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM

Post Die Casting Technologies and Techniques

9:00 AM – 9:30 AM EDT

ERWin®, a Robust Welding Insert Solution to Join Low & High Ductility High Pressure Die Casting Parts to Steel Structures on Standard Body-In-White Spot-Welding Assembly Lines, Stellantis Application

Location: Room 120

Presenter: – Gaming Engineering

Post Die Casting Technologies and Techniques

8:30 AM – 11:00 AM EDT

Board of Governors Committee Meeting

Location: Room 125

Committee Meetings

9:45 AM – 11:15 AM EDT

Thermally Controlling the Die

Moderator:

9:45 AM – 10:15 AM EDT

Exploring Die Lubricants as Thermal Buffering Agents in High-Pressure Die Casting

Location: Room 120

Presenter: – View Inc.

Thermally Controlling the Die

10:15 AM – 10:45 AM EDT

Merging HPDC Injection Process Parameters with Process Temperatures

Location: Room 120

Presenter: – Imago

Thermally Controlling the Die

10:45 AM – 11:15 AM EDT

The Impact of Corrosive Water on OEE, Repair Costs and Tool Life

Location: Room 120

Presenter: – Schaufler Tooling GmbH & Co. KG

Thermally Controlling the Die

10:00 AM – 3:00 PM EDT

NADCA CastView Presentation

CastView

10:00 AM – 3:00 PM EDT

NADCA Virtual Reality Project

Location: Booth 324

Virtual Reality

10:20 AM – 10:50 AM EDT

Effective and Automated Monitoring and Control Technologies for Industrial Process Fluids

Location: Booth 442

Innovation Theater

Sponsored By

11:00 AM – 11:30 AM EDT

EDRO-Bohler Innovative Material Solutions for High Pressure Die Casting Tooling.

Location: Booth 442

Innovation Theater

Sponsored By

12:30 PM – 2:00 PM EDT

Structural Die Casting Challenges

Moderator: – General Motors

12:30 PM – 1:00 PM EDT

Vacuum for Mega/Giga Castings

Location: Room 120

Presenter: – Viami International Inc.

Structural Die Casting Challenges

1:00 PM – 1:30 PM EDT

Challenges in the Machining of Large Castings

Location: Room 120

Presenter: – Fill USA, Inc.

Structural Die Casting Challenges

1:30 PM – 2:00 PM EDT

Challenges of a New Dimension - Development of Large Structural Castings without Compromise

Location: Room 120

Presenter:

Structural Die Casting Challenges

2:15 PM – 3:45 PM EDT

Optimizing Die Casting with Computer Modeling

Moderator:

2:15 PM – 2:45 PM EDT

Utilizing Geometric-Based Modeling for Predictive Die Casting Gating

Location: Room 120

Presenter:

Optimizing Die Casting with Computer Modeling

2:45 PM – 3:15 PM EDT

Assessing the Predictive Accuracy of Tresca Friction Criteria for Solder Formation in High Pressure Die Casting

Location: Room 120

Presenter: – Mercury Marine

Optimizing Die Casting with Computer Modeling

3:15 PM – 3:45 PM EDT

Digital Twin Integrating Cell Data for HPDC Process Modelling

Location: Room 120

Presenter: – National Research Council Canada

Optimizing Die Casting with Computer Modeling